| |
|
HOLMES ALUMINUM & HEAVY DUTY STEEL CARRIERS
STANDARD FEATURES |
| 3" raised solid side rails |
Deck available in steel or aluminum |
| Lighted dual controls |
Tilt lockout control |
| Cable tensioner |
Full length Nylatron slide pads |
| Dual outboard hold down system |
Full height cab protector |
| Holmes mud flaps |
Driver and passenger side chain trays |
| 4 rear tie down slots |
Spring loaded winch release |
| Federal standard 108 lights |
8,000 lb. winch with 50' of 3/8 cable |
| Back up alarm |
Steel carriers painted in black acrylic enamel |
| Cable roller guide |
Hydraulic tow bar with hooks & chains (17 1/2' carriers) |
| Preassembled and factory tested |
2,500 lb. independent wheel lift (19', 19'6", & 21' carriers) |
| Front safety chains |
Two power lift cylinders and one extension cylinder |
| Hydraulic pump |
All components for complete installation |
| 2 rear safety chains |
|
Back to Top
HOLMES ALUMINUM & HEAVY DUTY STEEL
CARRIERS SPECIFICATIONS |
|
ALUMINUM |
HEAVY DUTY STEEL |
| 17 1/2' |
19' |
21' |
17 1/2' |
19' |
21' |
| Inside Bed Width |
94" |
94" |
94" |
91 1/2" |
91 1/2" |
91 1/2" |
Bed & Body
Capacity-distributed load
Bed Size |
8,000 lbs.
17'6"x96" |
9,000 lbs.
19'x96" |
9,000 lbs.
21'x96" |
8,000 lbs.
17'6"x96" |
10,000 lbs.
19'x96" |
10,000 lbs.
21'x96" |
| Bed Surface |
Aluminum Alloy Extrusion |
Steel Diamond Plate |
Cab to Axle
Conventional
Cabover |
108"
112" |
118"/122"
127" * |
142"
144"/150" |
108"
112" |
118"/122"
127" * |
142"
144"/150" |
Recommended Chassis
GVW minimum (lbs.)
GVW maximum (lbs.) |
10,000
15,000 |
15,000
25,500 |
15,000
25,500 |
10,000
15,000 |
15,000
25,500 |
15,000
25,500 |
Tow Bar
Lift Rating (lbs.)
Tow Rating (lbs.) |
2,000
5,000 |
2,000
5,000 |
2,000
5,000 |
2,000
5,000 |
2,000
5,000 |
2,000
5,000 |
Independent Wheel Lift
Lift Rating (lbs.)
Tow Rating (lbs.) |
N/A
N/A |
3,000
6,250
|
3,000
6,250 |
N/A
N/A |
3,000
6,250 |
3,000
6,250 |
| * 19.6" body is available and recommended for cabover chassis with a 127" C.A. |
Back to Top
HOLMES ALUMINUM & HEAVY DUTY STEEL CARRIERS
OPTIONAL EQUIPMENT |
| Wrecker special light bar |
Switch panel |
| Work area lighting |
Optional color on side rails and top of deck (steel carrier) |
| Tool boxes |
Removable side rails (not available on 21' aluminum) |
| V-chain assembly |
Tie down chains |
| Tie down strap kit |
Smooth floor instead of diamond plate (steel carrier only) |
| PTO |
Trailer ball adapter |
| Additional crossmembers ( steel only) |
Planetary winch in lieu of worm gear winch |
Stationary cab protector
(requires additional 10" of C.A.) |
And all other popular |
Back to Top
HOLMES ALUMINUM & HEAVY DUTY STEEL CARRIERS
TRUCK RECOMMENDATIONS |
Holmes carriers should be installed on a chassis with GVWR of 10,000 to 25,500 lbs., dual rear wheels and a C.A. minimum of 108". Requires a manual transmission and at least one accessible PTO opening or optional clutch pump for automatic transmission. |
|
|
