CENTURY 614/FII T - STANDARD FEATURES
|
Tandem Hydraulic Pump |
Variable Speed Hydraulic Planetary Gear Winches |
Winch Cable Assemblies |
360° Directional Boom End Swivels |
Dual Winch Cutch Releases |
Power Boom Elevation with Integral Holding Valve |
Power Boom Extension |
E-Z Service Hydraulic Filters |
90" wide 108" C.A. Heavy Duty Body |
3 Tool Compartments Per Side |
Tunnel on Front Compartment |
Door Checks |
Chain Rack |
Medium Duty Truck Hitch Brackets |
Dual Control Stations |
12" Sills |
Two Rear Tie Back Loops |
Fenderettes |
Federal Standard 108 Light Group |
Wire Harness with Junction Box |
Safety Chains |
3 Pair of Lift Forks and Adapters |
Fork Holders |
6,000 lb. L-Arm System |
Mud Flaps |
In Cab and Hand Held Remote Control for Underlift |
Cable Tensioners |
Lubrication Fittings on All Shafts and Other Moving Parts |
|
The 3 large tool compartments provide ample storage space for your equipment. Door checks, chain rack and fork holder are provided as standard equipment. |
CENTURY 614/FII T - OPTIONAL EQUIPMENT
|
Aluminum Modular 84" C.A. Body with 24" Aluminum Saddle Box |
PTO |
Medium Duty Truck Hitch |
Work Lights |
Light Pylons |
Wrecker Special Light Bar |
Convenience Group |
Trailer Hitch Adapter |
Switch Panel |
Pivoting Spring Lift Adapters |
Many other popular Century options |
CENTURY 614/FII T - SPECIFICATIONS
|
Models 614/FII T
14 Ton Hydraulic Wrecker with Dual 15,000 lb. Hydraulic Planetary Gear Winches, Full Power Two Stage Boom. |
Winches
Rating (first layer) |
15,000 lbs. each |
Cable
Diameter and Length (each drum) |
1/2" x 150' |
Position
Boom |
Boom Length Center-Line Pivot Pin to Center-Line Sheave |
Maximum Working Height (1) |
Maximum Working Distance (2) |
Boom Rating
Static Lbs. |
First Stage |
7' 6" |
11' 6" |
22" |
28,000 lbs. (3) |
Second Stage |
12' 6" |
15' |
6' 10" |
12,000 lbs. (2) |
|
(1) At maximum boom elevation of 49 degrees above horizontal
(2) At boom angle of 1 degree above horizontal
(3) At boom angle of 10 degrees above horizontal
* Based on chassis frame height of 36" off ground.
** The ratings are cased on structural factors only - not vehicle capacity or capabilities |
CENTURY FORMULA II T - SPECIFICATIONS
|
The Formula II T underlift is constructed using a fabricated inner stinger for added strength while still maintaining a low profile. The twin tilt cylinders provide a 10° range of positive and negative tilt. |
Underlift Position |
Lift Fork Rating |
"L" Bar Rating |
Retracted |
10,500 lbs. |
6,000 lbs. |
T.E.M.A. |
9,000 lbs. |
6,000 lbs. |
Extended |
8,500 lbs. |
6,000 lbs. |
|
* Towing Rating - 32,000 lbs.
* Hydraulic extension - 34"
* Fully retracted distance from tailgate to rear face of crossbar - 35.5"
* Fully extended distance from tailgate to rear face of crossbar - 69.5"
* Maximum reach from tailgate to centerline of fork lift - 73" |
CENTURY FORMULA II SERIES - CHASSIS RECOMMENDATIONS
|
Minimum GVWR is 25,000 lbs., minimum C.A. dimension is 108", minimum frame length behind the centerline of the rear axle is 36". Maximum recommended tire size is 255/75 R 22.5 The outside frame rails of chassis extending behind cab must be free of fuel tanks, air tanks, battery boxes, etc.
Note: Specifications subject to change without notice. All ratings specified are based on structural factors only, not
vehicle capacities or capabilities. |
