CENTURY MODEL 211 - STANDARD FEATURES
|
Lightweight Pivot L-Arm System |
Dual Controls |
Safety Chains in Rear Pockets |
Mud Flaps |
Tool Compartments, Right & Left Side |
Back Up Alarm |
Variable Speed Hydraulic Winch |
Power Fold for Stinger Storage |
6x19 Hemp Center IPS 3/8" x 75' Wire Rope |
Cross Bar Sheave Attachment |
86" Wide Heavy Duty Body with 8" Sills |
All Components for Complete Installation |
Federal Standard 108 Light Group |
Lubrication Fittings on all Shafts and Other Moving Parts |
Wiring Harness with Junction Box |
Preassembled and Tested |
|
CENTURY MODEL 211 - OPTIONAL EQUIPMENT
|
PTO/Pump Combination |
Wrecker Special Light Bar |
Switch Panel |
Work Lights |
Convenience Group |
Front Push Bumper |
Trailer Ball Adapter |
24" Tunnel Tool Compartment for 84" C.A. |
Light Pylon |
Cable Anti-Spooling Tensioner |
Many other popular Century Options |
|
|
CENTURY MODEL 211 - SPECIFICATIONS
|
8-ton Recovery Boom (rated at boom swivel) with 8000 lb. hydraulic winch, 86" wide heavy duty body 60" C.A. |
BOOM
Using cross bar sheave attachment |
RETRACTED |
EXTENDED |
Lift Height from ground to hook at max. Boom elevation
Reach past tailgate at max. Boom elevation |
68"
34" |
81"
63" |
Range of Elevation |
0 - 40° |
|
Boom Rating at Boom Swivel |
16,000 lbs. |
|
Boom Rating at Crossbar Sheave Attachment |
4,000 lbs. |
|
WINCHES |
|
Rating (first layer of drum) |
8,000 lbs. |
CABLE |
|
Diameter and length (each drum)
Type
Working line limit |
3/8" Dia. x 75'
6 x 19 hemp center, IPS
3,500 lb. |
WHEEL LIFT |
POSITION |
INCHES |
Retracted Distance From Tailgate |
At Full Down
At Normal Tow Position |
29 3/4
34 |
Extended Distance From Tailgate |
At Full Down
At Normal Tow Position |
61
64 3/4 |
Cross Bar Spread |
Full Retracted
Full Extension |
60 3/8
90 5/8 |
Maximum Hydraulic Extension |
|
31 1/4 |
Lift rating
Tow rating
Chassis Frame cut-off
Approx. Weight |
4,000 lbs. (extended)
7,500 lbs.
35" cut off
2200 lbs. |
|
|
CENTURY MODEL 211 - CHASSIS RECOMMENDATIONS
|
Century Model 211 should be installed on a chassis with minimum GVW of 10,000 lbs., dual rear wheels and a
minimum C.A. of 60". A heavy-duty spring package is recommended. Requires a manual transmission and at
least one accessible PTO opening or optional clutch pump for automatic transmission.
Note: Specifications subject to change without notice. All ratings specified are based on structural factors only,
not vehicle capacities or capabilities. |